- Easy to fix with Quick-Fix or bolt through fixing
- Vandal-proof eyebolt & crossbolt
- 180° opening
- No more left or right swinging gates in stock
- 15 mm adjustable in height
- 25 mm adjustable in depth
- U clamp and GRIP in aluminium
- Hot-dip galvanized eyebolt and crossbolt
- Max width of the gate: 2000 mm
-
-
- 180° opening and closing angle
- Eyebolt: M20 hot-dip galvanised
- Grip: hot-dip galvanized
- No more left or right swinging gates in stock
- 20 mm adjustability in height
- Only the grip is available in different RAL-colours
- Version Z: U-shaped ear plate and groove plate zinc-plated
- Packed per 50 pieces
-
- Stainless steel bolt receiver
- Extruded stop plate in aluminium with rubber strip
- Easy left or right changing
- Innovative Quick-Fix mounting
- Adjustable for gate profiles: 40-60 mm width
- For rectangular and round profiles
-
Manual boom barrier, max 6m -
Manual boom barrier, max 6m -
Specifications
- Extreme weather resistance in any climate
- Unique and extremely durable patented design with anodized aluminium housing
- Strongest magnetic force on the market: magnetic distance of 30 mm (2x industry standard!)
- Tested up to 2 million cycles - Limited Lifetime Warranty!
- Rekeyable to match any lock: Schlage-C Key-in-knob cylinder (5pin, drilled 6pin)
- Full vertical adjustability and 25 mm horizontal adjustability - a gap of 10 mm up to 45 mm
- For left & right turning gates
- Push down prevention: only opens when magnet is pulled up, adding additional security
- Perfect for metal, vinyl or wooden gates, available for round (R) and square (K) posts
- *Before installing, always confirm any safety compliance requirements with the respective authorities
-
Specifications
- Complete set with lock, keep, cover plates, handles and cylinder
- 54 mm Europrofile cylinder with three keys
-
- Hinge set with aluminium reinforced hinge post plugs
- Hinge axle M12 in stainless steel
- Plug available for profile 40x40 mm
- Length of the threaded axle: 130 mm or 150 mm
- Fixing: slide in plug
-
- Opening angle up to 150° depending on the situation
- Specially developed for outdoor use: industrial quality
- Scratch resistant and corrosion free anodized aluminium housing
- Closing speed unaffected by temperature changes
- Fast and easy fixing with Quick-Fix
- For left and right turning gates
- Easy to open: Max. 25 Nm
-
- Guaranteed holding force tested on every magnetic lock
- 500h salt spray resistant! SGS certified (ISO 9227)
- Special two-layer protective coating developed for outdoor use
- Anti-residual magnetism kick-off system
- Minimal pulling force: 2500N (250 kg)
- Current: 460mA / 12V or 230mA / 24V
-
Single gate, frame 40x40, posts 60x60, Locinox Fortylock -
Single gate, frame 40x60, posts 80x80, Locinox lock -
Single gate, frame 40x40, posts 60x60, Locinox lock -
Single gate, frame 40x60, posts 80x80, Locinox lock -
- 100% mechanical: no battery nor electricity required
- Adjustable for horizontal or vertical mounting of the keep (catch bolt)
- Mechanical code panel on both sides
- Possibility to work with different entrance and exit codes
- Equipped with dust and rain covers
- Easy and fast set-up or modification of the access codes
- Possibility of setting up 4 to 6 digit codes
- Extremely strong and user-friendly mechanism
- Automatic code reset after pushing the handle
- Anti-code detection with integrated security press plate
- Stainless steel collar around the Twistfinger prevents cutting through the Twistfinger (catchbolt)
-
- Automatic 180° - closing with adjustable closing speed and final snap
- Railset included for 90° and 180° situations
- Scratch resistant and corrosion free anodized aluminium housing
- Compact & aesthetic design
- Closing speed unaffected by temperature changes
- For left & right turning gates
- Integrated pre-tension for extremely smooth installation
- Easy & fast mounting: Quick-Fix
- Easy to open: Max. 16 Nm
-
Cantilever gate, max 5000x2000H -
- 180° hydraulic gate closer with adjustable speed and final snap
- Aesthetic design
- Powder coated aluminium housing
- Closing speed unaffected by temperature changes
- Easy to open: Max. 32 Nm
- Vandal-proof
- For left & right turning gates
- Easy mounting with Quick-Fix
-
- Self-closing hinge with patented hydraulic damping
- Aesthetic design
- Powder coated aluminium housing
- Closing speed unaffected by temperature changes
- Easy to open: Max. 16 Nm
- Vandal-proof
- For left and right opening gates
- Easy mounting with Quick-Fix
- 2-dimensionally adjustable (2 x 20 mm)
-
- Tested up to 500.000 movements
- Fast and easy fixing with Quick-Fix
- Resistance to pressure on the latch bolt: 300 kg
- Easy left or right changing
- Corrosion-resistant: black anodized aluminium housing
- Adjustable for gate profiles: 40-60 mm width
- Voltage: 12V-24V AC/DC
- Consumption: 12V - 1,25A / 24V - 0,62A
- Power: 15W
-
- Includes 2 integrated magnets equipped with Quick-Fix mounting (MAGUNIT-2500)
- Including aluminium filling profile with Quick-Fix mounting (N-LINE-B-MAG profile)
- Profile length of 2 m
- Including 2 aluminium covers for an aesthetical finishing on top and bottom
- Specially designed for exterior use
- Voltage: 12V / 24V DC
- Current: 460mA / 12V or 230mA / 24V
-
leaf 400 kg, magnetic limit switch -
leaf 600 kg, magnetic limit switch
-
Setup Armor 24V complete for automation of swing gates with two leaves of up to 2.50 metres. -
leaf 2,5 m, 24v DC -
Setup Optimo OP3 UNI DL 230V 50Hz for automation of swing gates with two leaves up to 3 metres.
-
Установка Optimo OP5 UNI DL 230V 50Hz для автоматизации распашных ворот с двумя створками до 5 метров.
-
Technical data
- Raam:
- Tube 40x40 mm, 60x40 mm
- Voimalik_loppviimistlus:
- Zinc powder coating + powder coating Plascoat PPA 571 Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + Plascoat PPA 571
-
Technical data
- Raam:
- Tube 40x40 mm
- Varava_taide:
- Welded panel Ø4 mm, cell 50x100 mm
- Voimalik_loppviimistlus:
- Zinc powder coating + powder coating Plascoat PPA 571
-
Technical data
- Raam:
- Tube 40x40 mm
- Varava_taide:
- Welded panel 8x6x8 mm, cell 50x200 mm
- Voimalik_loppviimistlus:
- Zinc powder coating + powder coating Plascoat PPA 571 Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + Plascoat PPA 571
-
Technical data
- Raam:
- Tube 40x40 mm
- Varava_taide:
- Welded panel 6x5x6 mm, cell 50x200 mm
- Voimalik_loppviimistlus:
- Zinc powder coating + powder coating Plascoat PPA 571 Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + Plascoat PPA 571
-
Technical data
- Raam:
- Tube 40x40 mm
- Varava_taide:
- Tube 20x20 mm or tube Ø20 mm or oval 30x15 mm
- Voimalik_loppviimistlus:
- Zinc powder coating + powder coating Plascoat PPA 571 Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + Plascoat PPA 571
-
Technical data
- Raam:
- Tube 40x40 mm + U-profile 40x40 mm
- Varava_taide:
- Tube 20x20 mm or tube Ø20 mm or oval 30x15 mm
- Voimalik_loppviimistlus:
- Zinc powder coating + powder coating Plascoat PPA 571 Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + Plascoat PPA 571
-
Technical data
- Raam:
- Tube 40x40 mm, 60x40 mm
- Voimalik_loppviimistlus:
- Zinc powder coating + powder coating Plascoat PPA 571 Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + Plascoat PPA 571
-
Technical data
- Raam:
- Tube 40x40 mm, 60x40 mm
- Voimalik_loppviimistlus:
- Zinc powder coating + powder coating Plascoat PPA 571 Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + Plascoat PPA 571
-
Technical data
- Raam:
- Tube 40x40 mm, 60x40 mm
- Varava_taide:
- Welded panel 8x6x8 mm, cell 50x200 mm
- Voimalik_loppviimistlus:
- Zinc powder coating + powder coating Plascoat PPA 571 Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + Plascoat PPA 571
-
Technical data
- Raam:
- Tube 40x40 mm, 60x40 mm
- Varava_taide:
- Welded panel 6x5x6 mm, cell 50x200 mm
- Voimalik_loppviimistlus:
- Zinc powder coating + powder coating Plascoat PPA 571 Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + Plascoat PPA 571
-
Technical data
- Raam:
- Tube 40x40 mm, 60x40 mm
- Varava_taide:
- Tube 20x20 mm or tube Ø20 mm or oval 30x15 mm
- Voimalik_loppviimistlus:
- Zinc powder galvanized + powder coating Plascoat PPA 571 Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + Plascoat PPA 571
-
Technical data
- Raam:
- Tube 40x40 mm, 60x40 mm + U-profile 40x40 mm
- Varava_taide:
- Tube 20x20 mm or tube Ø20 mm or oval 30x15 mm
- Voimalik_loppviimistlus:
- Zinc powder coating + powder coating Plascoat PPA 571 Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + Plascoat PPA 571
-
Technical data
- Raam:
- Tube 60x40 mm, 60x60 mm – depending on gate size
- Voimalik_loppviimistlus:
- Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + dual component paint Dual component paint Powder coating (depending on gate size)
-
Technical data
- Raam:
- Tube 40x40 mm
- Varava_taide:
- Welded panel Ø4 mm, cell 50x100 mm
- Voimalik_loppviimistlus:
- Powder coating
-
Technical data
- Raam:
- Tube 60x40 mm, 60x60 mm – depending on gate size
- Varava_taide:
- Welded panel 8x6x8 mm, cell 50x200 mm
- Voimalik_loppviimistlus:
- Hot dip galvanized Hot dip galvanized + powder coating Hot dip galvanized + dual component paint Dual component paint Powder coating (depending on gate size)
